01 Front · Design board
1 / 7
Accessories · Tech
Same stand case plated with the four-step belt wear system: magnetic case, belt pouch, 360° belt clip and on-belt carry.
01 Front — Straight-on front: silhouette, closure and the placement of the Bogolan mudcloth panel.
View 1 of 7: 01 Front of Magnetic Stand Case — Belt Wear System. Straight-on front: silhouette, closure and the placement of the Bogolan mudcloth panel.
The House publishes imagery and design narrative. Construction files, refinement records and production data remain confidential House IP.
No studio photograph released yet — this page reads the owner-approved design board.
“Magnetic Stand Case — Belt Wear System” is published under Accessories · Tech as a protected House mark.
The narrative and where the Bogolan signature sits are told openly; the artwork files are not.
Fabric family and heritage colourways are stated; mill sourcing and finishing recipes are withheld.
Tread identity, stack height and hardware naming are public; tooling geometry and moulds are protected.
Held in the Innovation Vault behind authenticated, short-lived signed links. Never published.
Refinement pipeline settings and prompt history are internal studio IP.
Supplier identities, sampling stage and costing stay confidential to the House.
In development
Reference study · not yet for sale
This piece is documented from an atelier design board. It is shown for reference only while the house completes its photography, sizing and release. Purchase, pricing and availability appear here once the owner approves the finished piece.
Readiness · 1 of 8 complete
👁️ 7-View master production board
1. Apparel (Chest) — High-density metallic gold embroidery over premium cotton
Premium hoodies, shirts and tracksuits: 3D puff embroidery in metallic gold thread, raised off the fabric so the emblem catches the light.
2. Apparel (Sleeve) — Seamless matte black silicone heat-seal print on the right cuff
Minimalist accent at the upper centre-back neck or right wrist, executed in high-frequency TPU printing for a durable rubberised texture.
3. Footwear (Lateral) — Large aerodynamic gold swoosh-Z stitched on the outer leather
A separate piece of metallic gold leather or reflective vinyl cut and stitched onto the outer side panel with ultra-tight matching thread lines.
4. Footwear (Heel) — Solid-cast 3D zinc-alloy metal badge bolted to the counter
Mould-forged zinc-alloy emblem in polished mirror-gold plating, clipped securely through the leather heel tab.
5. Footwear (Insole) — Premium gold-foil hot stamp pressed into the leather liner
Centred under the heel inside the shoe, heavy-pressure foil hot-stamped into ultra-soft leather or suede so it will not rub off with wear.
6. Fragrance (Bottle) — Raised metallic curved sticker flush on the stiletto glass
Electroplated nickel transfer label formed around the glass shoe curve, matched to the gold stiletto heel.
7. Event tent (Canopy) — Flat vector gold gradient printed on 600D canopy fabric
Single-path high-contrast vector for trade-show tents and tables, scaled across 3×6m dye-sublimation panels with zero pixelation.
Leather case, microfiber-lined belt pouch, rotating belt clip
Story behind the design
Ntomi mudcloth in moss & ochre, worked into the signature band.
moss & ochre
ZB-NTOM-MOS-153
Bogolanfini begins as hand-woven cotton strip cloth, joined selvedge to selvedge before it ever meets the dye. It is dyed with a n'gallama leaf bath, then river-mud fermentation over three passes — the pattern is not printed on, it is drawn in mud and then the ground around it is lifted away. On this piece the mudcloth meets leather case, microfiber-lined belt pouch, rotating belt clip.
The tape carries fanned chevrons opening from a spine. In the Bamana reading, Ntomi is the shade tree — gathering, welcome, shelter for others. Z-Vibe keeps the motif at heritage scale rather than shrinking it into a logo pattern, so the hand of the maker stays legible on the finished piece.
Mudcloth is placed on construction points, never scattered as decoration: signature band. These are the lines the eye already follows on this silhouette, so the cloth reads as structure — an edge, a facing, a seam — and holds its meaning at three metres and at arm's length alike.
Each length is bias-cut for the curved runs, hand-basted before the topstitch so the motif never breaks at a seam. Tape width and motif repeat are cut to the size band, so a petite run and an extended run carry the same proportion rather than the same measurement.
African heritage, global luxury, future design: the mudcloth is set against European finishing and the aged-gold Z-Closure™ mark. Nothing is erased on either side — the meeting is the design. Different Roots. One Human Story.
Care · Cold hand-wash or specialist clean only. Mud dye deepens with age; never bleach, and dry flat away from direct sun.
Each step below reflects work that actually exists for this piece. Refinement is a design process — it does not imply the piece is production-released.
Owner-approved design board intakeComplete
The signed design board was registered as the source of truth; silhouette, Bogolan placement and hardware were locked from it.
Z-Sole Architecture™ assignmentComplete
Sole identity resolved for this style — Z-Grip™ System Cut (ZG-1780) on the Z-Grip™ lugged rubber chassis, raked sawtooth blades set on a 12° forward rake, narrow blade last drawn long through the waist, stack 18 mm heel / 16 mm forefoot, 2 mm drop, laced in twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets, diamond Z at the lateral wall, Z-VIBE at the medial wall. Tread, last and stack height were made unique to the shoe rather than shared across the register.
Bogolan signature verificationComplete
Mudcloth was confirmed as a construction detail (laces, panel, tongue or heel band) and not surface print, and the aged-gold Z-Closure™ mark was placed.
Z-Studio 4K refinement passNot yet run
No refinement output released yet — this page reads the approved board unretouched.
Seven-view studio captureNot yet run
No angle has been shot yet; all 7 views read the design board.
