House · Z-Vibe Headwear™

Z-Orbit Cap

Structured black cotton cap with a Bogolan side band. Concept register. Wipe leather and coated shells with a soft cloth, wash knits cool, and keep the hand-printed Bogolan trim away from bleach so the clay tones stay true.

Published imageryZ-Studio refined · 1 of 7 views shot
Loading image: Z-Orbit Cap — Front viewZ-Orbit Cap — Front view
1/1 · Front

Choose how you inspect it.

360° not shot yet · seven studio views available

Visual experience—color and fit may vary.

Seven views

  • Z-Orbit Cap — Unisex, 01 Front (view 1 of 7). Straight-on front: silhouette, closure and the placement of the Bogolan mudcloth panel.01 Front
    Straight-on front: silhouette, closure and the placement of the Bogolan mudcloth panel.
  • Z-Orbit Cap — Unisex, 02 Left (view 2 of 7). Left side: gusset depth, strap anchor and the edge finish.02 Left
    Left side: gusset depth, strap anchor and the edge finish.
  • Z-Orbit Cap — Unisex, 03 Right (view 3 of 7). Right side: opposite panel, hardware placement and the house Z mark.03 Right
    Right side: opposite panel, hardware placement and the house Z mark.
  • Z-Orbit Cap — Unisex, 04 Back (view 4 of 7). Back view: rear panel, stitch lines and any slip pocket.04 Back
    Back view: rear panel, stitch lines and any slip pocket.
  • Z-Orbit Cap — Unisex, 05 Interior (view 5 of 7). Interior: lining, compartments and the internal pocket.05 Interior
    Interior: lining, compartments and the internal pocket.
  • Z-Orbit Cap — Unisex, 06 Inner tags (view 6 of 7). Hardware and label: closure mechanism, atelier reference and care instructions.06 Inner tags
    Hardware and label: closure mechanism, atelier reference and care instructions.
  • Z-Orbit Cap — Unisex, 07 Fabric detail (view 7 of 7). Material detail: close study of the leather or cloth and the hand-printed motif.07 Fabric detail
    Material detail: close study of the leather or cloth and the hand-printed motif.

Z-Orbit Cap — the seven studio views

Z-Motion™ film slot

No film cut for Z-Orbit Cap yet. The slot is reserved on the plate.

Commission the film →

House notes

Full description

Structured black cotton cap with a Bogolan side band. Concept register. Wipe leather and coated shells with a soft cloth, wash knits cool, and keep the hand-printed Bogolan trim away from bleach so the clay tones stay true.

Made up in Cotton twill, satin, ribbed knit and coated shell, woven Bogolan band, gold diamond Z pin.

Registered in 4 colourways: Onyx Black, Deep Forest, Rust Clay, Bone Ivory.

Sized One size–One size across the run.

Filed under Z-Vibe Headwear™ · Crown & Comfort as Women suits, carried on the House · Z-Vibe Headwear™ line.

Fabric
Cotton twill, satin, ribbed knit and coated shell, woven Bogolan band, gold diamond Z pin
Wearer & garment
Women · Suits

Crown the journey.

Color

Select a color to update all 7 views.

12 colourways

SKU ZV-Z-VIBE-HEADWEAR-Z-ORBIT-CAP

Materials
Cotton twill
Stretch
Provided by seller
Care
Specialist dry clean; cool iron on the reverse.
Maker
Provided by seller
Sizes
One size
Availability
Provided by seller
Fulfilment
Provided by seller

Size

Bogolan detailing

ZB-WHIT-COR-HOUS

Mudcloth in white & brownlight tape on deep cloth.

24mm tape · 56mm motif repeat · house proportion

  • collar facing
  • lapel edge
  • left cuff turn-back

Matching cloth & accessory

Braided mudcloth cord with a gold Z tip.

Story behind the design

The Bogolan story

Ntomi mudcloth in white & brown, worked into the collar facing, lapel edge, left cuff turn-back.

white & brown

ZB-NTOM-WHI-547

  • collar facing
  • lapel edge
  • left cuff turn-back

The cloth

Bogolanfini begins as hand-woven cotton strips joined into a panel, then bonded to a vegetable-tanned backing. It is dyed with a double n'gallama bath with a lime-brightened reserve for the pale ground — the pattern is not printed on, it is drawn in mud and then the ground around it is lifted away. On this piece the mudcloth meets cotton twill.

The motif — Ntomi

The tape carries fanned chevrons opening from a spine. In the Bamana reading, Ntomi is the shade tree — gathering, welcome, shelter for others. Z-Vibe keeps the motif at heritage scale rather than shrinking it into a logo pattern, so the hand of the maker stays legible on the finished piece.

Why it sits where it sits

Mudcloth is placed on construction points, never scattered as decoration: collar facing, lapel edge, left cuff turn-back. These are the lines the eye already follows on this silhouette, so the cloth reads as structure — an edge, a facing, a seam — and holds its meaning at three metres and at arm's length alike.

The hand-work

Each length is block-matched panel to panel — the atelier discards any length where the repeat cannot be aligned. Tape width and motif repeat are cut to the size band, so a petite run and an extended run carry the same proportion rather than the same measurement.

Global Heritage Fusion™

African heritage, global luxury, future design: the mudcloth is set against European finishing and the aged-gold Z-Closure™ mark. Nothing is erased on either side — the meeting is the design. Different Roots. One Human Story.

Care · Spot-clean the mudcloth with cool water and a soft cloth. Dry-clean the body of the piece; the tape is colour-set but not bleach-safe.

Refinement provenance

Z-Studio refined · 1/7 views shot

Each step below reflects work that actually exists for this piece. Refinement is a design process — it does not imply the piece is production-released.

  1. Owner-approved design board intakeComplete

    The signed design board was registered as the source of truth; silhouette, Bogolan placement and hardware were locked from it.

  2. Z-Sole Architecture™ assignmentComplete

    Sole identity resolved for this style — Z-Grip™ Cap Cut (ZG-2124) on the Z-Grip™ lugged rubber chassis, interlocking arrowhead cleats angled outward for lateral bite, tapered aerodynamic last with a raked heel breast, stack 22 mm heel / 18 mm forefoot, 4 mm drop, laced in heavy Bogolan rope lace, brass-crimped tips, diamond Z at the lateral wall, Z-VIBE at the medial wall. Tread, last and stack height were made unique to the shoe rather than shared across the register.

  3. Bogolan signature verificationComplete

    Mudcloth was confirmed as a construction detail (laces, panel, tongue or heel band) and not surface print, and the aged-gold Z-Closure™ mark was placed.

  4. Z-Studio 4K refinement passComplete

    Studio refinement rebuilt the shoe at 4K: cleaner last geometry, corrected proportions and true material rendering on the released angles.

  5. Seven-view studio captureIn progress

    1 of 7 angles are distinct photographs; 02 Left, 03 Right, 04 Back, 05 Interior, 06 Inner tags, 07 Fabric detail still read the design board.

The Story Behind the Design

Cut in Cotton twill with satin, ribbed knit and coated shell, woven Bogolan band, gold diamond Z pin. Sculpted shoulder, defined waist, generous layering room.

Bogolan is placed with intention \u2014 collar facing, lapel edge, left cuff turn-back \u2014 a construction language rather than decoration.

Z cuff link at the Circular gold Z medallion at the closure, finished under Global Heritage Fusion\u2122: African heritage in dialogue with global tailoring and future design.

Ask Z-ONE about this piece

House treatment

Momentum, tailored.

Bogolan Signature
Main cloth
brushed cashmere blend
Bogolan signature
hand-blocked woven cotton Bogolan mudcloth, matte and tactile, cross-hatch field geometry, worked into the centre band, edge binding, buckle tab, with inner band.
Heritage palette
Bogolan mudcloth, white & brown
Mudcloth placement
  • collar facing
  • lapel edge
  • left cuff turn-back
Z hardware
Z cuff link — discreet, functional, never a chest logo.
Fit
Sculpted shoulder, defined waist, generous layering room.
Editorial
Worn by our White house model, profile, chin lifted.

In development

Reference study · not yet for sale

This piece is documented from an atelier design board. It is shown for reference only while the house completes its photography, sizing and release. Purchase, pricing and availability appear here once the owner approves the finished piece.

Readiness · 1 of 8 complete

  • Seven approved image views (01 Front, 02 Left, 03 Right, 04 Back, 05 Interior, 06 Inner tags, 07 Fabric detail)1 of 7 angles shot. The rest are read from the design board.
  • Approved primary assetDesign board in use — reference only, awaiting owner approval.
  • Product name and descriptionName and description written.
  • SKU and variant / colour mappingNo registered SKU for this piece yet.
  • Approved retail priceNo approved price — nothing is displayed.
  • Real inventoryNo connected stock feed — quantities are not shown.
  • Fulfilment and return policyFulfilment and returns not attached yet.
  • Owner approval to publishAwaiting explicit owner release.
Open the full house study

More from Z-Vibe Headwear™ · Crown & Comfort

Z-Orbit Cap

12 colourways

Try-on soonRelease status