Z-Digital Aurora Or — Z-Digital™

01 Front · studio photograph

The design story

Z-Digital Aurora Or — an aged-gold and black high-top with a mudcloth collar band and gold light run. The Z-Glide Wheel System™ is fitted: lock the wheels flush with the sole to walk, or deploy them below the sole to roll, with Z-Beam™ lighting at the toe. Bogolan mudcloth is placed as a considered construction detail, never as surface print, and the aged-gold Z-Closure™ hardware signs the shoe.

Five cyber-technical house shoes from the approved Z-Digital™ board. Each pair carries the Z-Glide Wheel System™ — lock the wheels flush to walk, deploy them to roll, and light the step with Z-Beam™.

Materials & craft

Upper: Technical mesh and house leather upper, woven Bogolan mudcloth construction panel, Bogolan mudcloth lacing, Z-Glide™ retractable wheel chassis with Lock / Walk / Roll collar, Z-Beam™ toe lighting module, aged-gold Z-Closure™ hardware. Z-Air™ Or Cut (ZA-4110) on the Z-Air™ cushioned EVA chassis, chevron storm channels cut edge to edge for water clearance, narrow blade last drawn long through the waist, stack 18 mm heel / 16 mm forefoot, 2 mm drop, laced in twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets, diamond Z at the lateral wall, Z-VIBE at the medial wall
Sole: Z-Air™ Or Cut (ZA-4110) on the Z-Air™ cushioned EVA chassis, chevron storm channels cut edge to edge for water clearance, narrow blade last drawn long through the waist, stack 18 mm heel / 16 mm forefoot, 2 mm drop, laced in twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets, diamond Z at the lateral wall, Z-VIBE at the medial wall
Heritage: Hand-printed Bogolan mudcloth facing, twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets — Global Heritage Fusion™.

Fit guidance

True to size through the forefoot with a snug collar that softens after a few wears.

Width: Standard D width, ankle collar padded for support without pressure.
Last: narrow blade last drawn long through the waist
Stack: 18 mm heel / 16 mm forefoot, 2 mm drop
Break-in: A few wears for the collar to settle.
Socks: Sized over a standard performance sock.
Lacing: twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets Re-lace from the throat up for a locked midfoot.
Z-Glide™ wheels: Fit is measured with the wheels retracted flush to the sole. Deployed, the stack rises a few millimetres — no size change required.

Wearable specs

Z-Air™ Or Cut · ZA-4110

Wheel lock range

14mm

3 collar positions · 4 wheels

Collar travels 14 mm across three detented positions — lock, walk and roll — each held by the carbon-composite pin.

Sole clearance · flush vs drop

LockFlush · 7 mm
Wheels retracted level with the outsole and pinned — pure walking geometry.
WalkFlush · 7 mm
Wheels stay level, brake damper released for a soft glide through toe-off.
RollDropped · 21 mm (+14 drop)
Axles descend 14 mm, lifting the shoe onto free-spinning hubs.

Stack · 18 mm heel / 16 mm forefoot, 2 mm drop

Z-Beam™ lighting modes

Off: Lighting module dormant. The lens reads as a brushed aged-gold inlay at the toe.
Running light: A low ivory running light traces the toe cap — presence, not glare.
Headlight: Twin forward headlights throw a warm beam ahead of the step for night streets.
Turn signal: Amber side pulse at the quarter panel, the pedestrian's indicator.

Laces · twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets

Chassis, hubs and heel cell are carried inside the midsole cavity so the shoe still reads as ready-to-wear.

Z-Glide Wheel System™ is a house design specification shown for review. Figures describe the intended engineering, not a certified production part.

Z-Sole Architecture™

Z-Air™ Or Cutunit ZA-4110

Cut for this style alone — no other shoe in the house carries this sole.

Chassis: Z-Air™ cushioned EVA — long-day rebound under a light shell
Tread cut: chevron storm channels cut edge to edge for water clearance
Last: narrow blade last drawn long through the waist
Stack: 18 mm heel / 16 mm forefoot, 2 mm drop
Laces: twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets
Side signature: Diamond Z medallion, aged gold, set into the lateral wall. Z-VIBE wordmark, tonal debossed, along the medial wall.

Reference specification for design review — not a manufacturing document.

Z-Glide Wheel System™

4 wheels · lockable · Z-Beam™

Twin retractable axles, forefoot and heel, recessed into the midsole cavity.

Guided demonstration · wheel collar

Step 1 of 3

Step 1 · Lock

You do: Press the heel collar down until it clicks.
Chassis: Both axles retract into the midsole cavity and the collar pin engages.
Underfoot: A firm, quiet outsole — the shoe behaves as a walking sneaker with no wheel travel.

Wheels fully retracted into the chassis, level with the bottom of the sole. The collar is pinned — the shoe walks like any luxury sneaker.

Collar pinned · wheels immobilised · wheel drop 0 mm

Z-Beam™ lighting

A low ivory running light traces the toe cap — presence, not glare.

Heel-cell battery with step-harvest trickle charge · USB-C service port under the medial collar

· Aged-gold anodised wheel hubs
· Polyurethane 62A treads
· Carbon-composite retraction collar
· Woven Bogolan mudcloth chassis facing

Z-Glide Wheel System™ is a house design specification shown for review. Figures describe the intended engineering, not a certified production part.

Compare this sole with another shoe

Story behind the design

The Bogolan story

Sirablen mudcloth in moss & ochre, worked into the crop neck band, left cuff, right cuff.

moss & ochre

ZB-SIRA-MOS-091

crop neck band
left cuff
right cuff
front placket

The cloth

Bogolanfini begins as cotton mudcloth backed with a fine leather skiver so it can take a lace and a lasting pull. It is dyed with a wolo bark tannin with iron-rich mud drawn from the Niger banks — the pattern is not printed on, it is drawn in mud and then the ground around it is lifted away. On this piece the mudcloth meets technical mesh and house leather upper, woven bogolan mudcloth construction panel, bogolan mudcloth lacing, z-glide™ retractable wheel chassis with lock / walk / roll collar, z-beam™ toe lighting module, aged-gold z-closure™ hardware. z-air™ or cut (za-4110) on the z-air™ cushioned eva chassis, chevron storm channels cut edge to edge for water clearance, narrow blade last drawn long through the waist, stack 18 mm heel / 16 mm forefoot, 2 mm drop, laced in twin-tone bogolan flat tape, obsidian on ivory, aged-gold aglets, diamond z at the lateral wall, z-vibe at the medial wall.

The motif — Sirablen

The tape carries a broken line stepping across the ground cloth. In the Bamana reading, Sirablen is the road home — steadiness on a long journey. Z-Vibe keeps the motif at heritage scale rather than shrinking it into a logo pattern, so the hand of the maker stays legible on the finished shoe.

Why it sits where it sits

Mudcloth is placed on construction points, never scattered as decoration: crop neck band, left cuff, right cuff, front placket. These are the lines the eye already follows on this silhouette, so the cloth reads as structure — an edge, a facing, a seam — and holds its meaning at three metres and at arm's length alike.

The hand-work

Each length is hand-turned and pick-stitched in silk thread, then pressed over a ham so the tape sits flat, not glued. Tape width and motif repeat are cut to the size band, so a petite run and an extended run carry the same proportion rather than the same measurement.

Global Heritage Fusion™

African heritage, global luxury, future design: the mudcloth is set against European finishing and the aged-gold Z-Closure™ mark. Nothing is erased on either side — the meeting is the design. Different Roots. One Human Story.

Care · Cold hand-wash or specialist clean only. Mud dye deepens with age; never bleach, and dry flat away from direct sun.

Refinement provenance

Z-Studio refined · 1/7 views shot

Each step below reflects work that actually exists for this piece. Refinement is a design process — it does not imply the piece is production-released.

Owner-approved design board intakeComplete
The signed design board was registered as the source of truth; silhouette, Bogolan placement and hardware were locked from it.
Z-Sole Architecture™ assignmentComplete
Sole identity resolved for this style — Z-Air™ Or Cut (ZA-4110) on the Z-Air™ cushioned EVA chassis, chevron storm channels cut edge to edge for water clearance, narrow blade last drawn long through the waist, stack 18 mm heel / 16 mm forefoot, 2 mm drop, laced in twin-tone Bogolan flat tape, obsidian on ivory, aged-gold aglets, diamond Z at the lateral wall, Z-VIBE at the medial wall. Tread, last and stack height were made unique to the shoe rather than shared across the register.
Bogolan signature verificationComplete
Mudcloth was confirmed as a construction detail (laces, panel, tongue or heel band) and not surface print, and the aged-gold Z-Closure™ mark was placed.
Z-Glide™ wheel & Z-Beam™ lighting integrationComplete
The retractable wheel housing and lock/unlock travel were fitted into the sole stack, with the forward beam module set into the toe box.
Z-Studio 4K refinement passComplete
Studio refinement rebuilt the shoe at 4K: cleaner last geometry, corrected proportions and true material rendering on the released angles.
Seven-view studio captureIn progress
1 of 7 angles are distinct photographs; 02 Left, 03 Right, 04 Back, 05 Interior, 06 Inner tags, 07 Fabric detail still read the design board.

View the full parade plate