Z-Crampon Summit Oxblood — 01 Front

01 Front · studio photograph

The design story

Z-Crampon Summit Oxblood — a burnished oxblood shell over an ivory midsole and stud rail. The Z-Glide Wheel System™ heel bar shares the same collar: lock the wheels flush for walking, or deploy them to roll. Z-Beam™ running lights sit in the toe cap. Bogolan mudcloth is placed as a considered construction detail, never as surface print, and the aged-gold Z-Closure™ hardware signs the boot.

Ten ice-traction house boots. A single heel collar governs both the retractable stud plate and the Z-Glide Wheel System™ — lock the wheels flush to walk, deploy them to roll, and light the step with Z-Beam™.

Materials & craft

Upper
Storm-sealed leather shell, thermal lining, retractable ice-stud plate, Z-Glide™ retractable heel wheel bar with Lock / Walk / Roll collar, Z-Beam™ toe lighting module, woven Bogolan mudcloth collar band, aged-gold Z-Closure™ hardware. Z-Ice™ Oxblood Cut (ZI-7261) on the Z-Ice™ winter ice-grip chassis, fractured basalt facets with a polished torsion spine, narrow blade last drawn long through the waist, stack 28 mm heel / 18 mm forefoot, 10 mm drop, laced in flat woven Bogolan mudcloth tape, aged-gold aglets, diamond Z at the lateral wall, Z-VIBE at the medial wall
Sole
Z-Ice™ Oxblood Cut (ZI-7261) on the Z-Ice™ winter ice-grip chassis, fractured basalt facets with a polished torsion spine, narrow blade last drawn long through the waist, stack 28 mm heel / 18 mm forefoot, 10 mm drop, laced in flat woven Bogolan mudcloth tape, aged-gold aglets, diamond Z at the lateral wall, Z-VIBE at the medial wall
Heritage
Hand-printed Bogolan mudcloth facing, flat woven Bogolan mudcloth tape, aged-gold aglets — Global Heritage Fusion™.

Fit guidance

Runs true to size with room for a mid-weight sock. Take your usual size; size up half for thermal socks.

Width
Standard D width, built over a rounded toe box for all-day standing.
Last
narrow blade last drawn long through the waist
Stack
28 mm heel / 18 mm forefoot, 10 mm drop
Break-in
Two to three wears for the upper to mould around the ankle.
Socks
Sized with a thermal sock in mind — keep your usual size unless you layer two pairs.
Lacing
flat woven Bogolan mudcloth tape, aged-gold aglets Re-lace from the throat up for a locked midfoot.
Z-Glide™ wheels
Fit is measured with the wheels retracted flush to the sole. Deployed, the stack rises a few millimetres — no size change required.

Wearable specs

Z-Ice™ Oxblood Cut · ZI-7261

Wheel lock range

14mm

3 collar positions · 2 wheels

Collar travels 14 mm across three detented positions — lock, walk and roll — each held by the carbon-composite pin.

Sole clearance · flush vs drop

  • LockFlush · 6 mm

    Wheels retracted level with the outsole and pinned — pure walking geometry.

  • WalkFlush · 6 mm

    Wheels stay level, brake damper released for a soft glide through toe-off.

  • RollDropped · 20 mm (+14 drop)

    Axles descend 14 mm, lifting the shoe onto free-spinning hubs.

Stack · 28 mm heel / 18 mm forefoot, 10 mm drop

Z-Beam™ lighting modes

Off
Lighting module dormant. The lens reads as a brushed aged-gold inlay at the toe.
Running light
A low ivory running light traces the toe cap — presence, not glare.
Headlight
Twin forward headlights throw a warm beam ahead of the step for night streets.

Laces · flat woven Bogolan mudcloth tape, aged-gold aglets

Chassis, hubs and heel cell are carried inside the midsole cavity so the shoe still reads as ready-to-wear.

Z-Glide Wheel System™ is a house design specification shown for review. Figures describe the intended engineering, not a certified production part.

Z-Sole Architecture™

Z-Ice™ Oxblood Cutunit ZI-7261

Cut for this style alone — no other shoe in the house carries this sole.

Chassis
Z-Ice™ winter ice-grip — siped cold-compound hold on ice and packed snow
Tread cut
fractured basalt facets with a polished torsion spine
Last
narrow blade last drawn long through the waist
Stack
28 mm heel / 18 mm forefoot, 10 mm drop
Laces
flat woven Bogolan mudcloth tape, aged-gold aglets
Side signature
Diamond Z medallion, aged gold, set into the lateral wall. Z-VIBE wordmark, tonal debossed, along the medial wall.

Reference specification for design review — not a manufacturing document.

Z-Glide Wheel System™

2 wheels · lockable · Z-Beam™

Heel wheel bar sharing the collar with the retractable ice-stud plate.

Guided demonstration · wheel collar

Step 1 of 3

Step 1 · Lock

You do
Press the heel collar down until it clicks.
Chassis
Both axles retract into the midsole cavity and the collar pin engages.
Underfoot
A firm, quiet outsole — the shoe behaves as a walking sneaker with no wheel travel.

Wheels fully retracted into the chassis, level with the bottom of the sole. The collar is pinned — the shoe walks like any luxury sneaker.

Collar pinned · wheels immobilised · wheel drop 0 mm

Z-Beam™ lighting

A low ivory running light traces the toe cap — presence, not glare.

Heel-cell battery with step-harvest trickle charge · USB-C service port under the medial collar

  • · Aged-gold anodised wheel hubs
  • · Polyurethane 62A treads
  • · Carbon-composite retraction collar
  • · Woven Bogolan mudcloth chassis facing

Z-Glide Wheel System™ is a house design specification shown for review. Figures describe the intended engineering, not a certified production part.

Compare this sole with another shoe

Story behind the design

The Bogolan story

Ntomi mudcloth in burgundy & black, worked into the crop neck band, left cuff, right cuff.

burgundy & black

ZB-NTOM-BUR-200

  • crop neck band
  • left cuff
  • right cuff
  • front placket

The cloth

Bogolanfini begins as cotton mudcloth backed with a fine leather skiver so it can take a lace and a lasting pull. It is dyed with a n'tjankara leaf mordant followed by a slow black-mud pass — the pattern is not printed on, it is drawn in mud and then the ground around it is lifted away. On this piece the mudcloth meets storm-sealed leather shell, thermal lining, retractable ice-stud plate, z-glide™ retractable heel wheel bar with lock / walk / roll collar, z-beam™ toe lighting module, woven bogolan mudcloth collar band, aged-gold z-closure™ hardware. z-ice™ oxblood cut (zi-7261) on the z-ice™ winter ice-grip chassis, fractured basalt facets with a polished torsion spine, narrow blade last drawn long through the waist, stack 28 mm heel / 18 mm forefoot, 10 mm drop, laced in flat woven bogolan mudcloth tape, aged-gold aglets, diamond z at the lateral wall, z-vibe at the medial wall.

The motif — Ntomi

The tape carries fanned chevrons opening from a spine. In the Bamana reading, Ntomi is the shade tree — gathering, welcome, shelter for others. Z-Vibe keeps the motif at heritage scale rather than shrinking it into a logo pattern, so the hand of the maker stays legible on the finished shoe.

Why it sits where it sits

Mudcloth is placed on construction points, never scattered as decoration: crop neck band, left cuff, right cuff, front placket. These are the lines the eye already follows on this silhouette, so the cloth reads as structure — an edge, a facing, a seam — and holds its meaning at three metres and at arm's length alike.

The hand-work

Each length is bias-cut for the curved runs, hand-basted before the topstitch so the motif never breaks at a seam. Tape width and motif repeat are cut to the size band, so a petite run and an extended run carry the same proportion rather than the same measurement.

Global Heritage Fusion™

African heritage, global luxury, future design: the mudcloth is set against European finishing and the aged-gold Z-Closure™ mark. Nothing is erased on either side — the meeting is the design. Different Roots. One Human Story.

Care · Spot-clean the mudcloth with cool water and a soft cloth. Dry-clean the body of the piece; the tape is colour-set but not bleach-safe.

Refinement provenance

Z-Studio refined · 1/7 views shot

Each step below reflects work that actually exists for this piece. Refinement is a design process — it does not imply the piece is production-released.

  1. Owner-approved design board intakeComplete

    The signed design board was registered as the source of truth; silhouette, Bogolan placement and hardware were locked from it.

  2. Z-Sole Architecture™ assignmentComplete

    Sole identity resolved for this style — Z-Ice™ Oxblood Cut (ZI-7261) on the Z-Ice™ winter ice-grip chassis, fractured basalt facets with a polished torsion spine, narrow blade last drawn long through the waist, stack 28 mm heel / 18 mm forefoot, 10 mm drop, laced in flat woven Bogolan mudcloth tape, aged-gold aglets, diamond Z at the lateral wall, Z-VIBE at the medial wall. Tread, last and stack height were made unique to the shoe rather than shared across the register.

  3. Bogolan signature verificationComplete

    Mudcloth was confirmed as a construction detail (laces, panel, tongue or heel band) and not surface print, and the aged-gold Z-Closure™ mark was placed.

  4. Z-Glide™ wheel & Z-Beam™ lighting integrationComplete

    The retractable wheel housing and lock/unlock travel were fitted into the sole stack, with the forward beam module set into the toe box.

  5. Z-Studio 4K refinement passComplete

    Studio refinement rebuilt the shoe at 4K: cleaner last geometry, corrected proportions and true material rendering on the released angles.

  6. Seven-view studio captureIn progress

    1 of 7 angles are distinct photographs; 02 Left, 03 Right, 04 Back, 05 Interior, 06 Inner tags, 07 Fabric detail still read the design board.

View the full parade plate